| Site Navigation |
|---|
|
|
| Builders Networks |
| RV Builders IM Network |
| Van's Airforce (RV-10) |
| Matronics Lists |
| Micellaneous Links |
| Van's Aircraft |
| Avery Tools |
| AOPA |
| EAA |
| EAA Chapter 79 |
| Aircraft Spruce |
February 9, 2004
Camera batteries died, so no pictures for today. I only had one shot to take anyways, and that was of the rolled trailing edge on one of the skins. There's enough of a bend to see that it's there, but not enough for it to really be noticeable. We'll see whether it's enough when I get around to riveting.
I also got around to ordering the sealant for the trailing edge, as well as a 3/32" cupped set for my rivet gun, and some extra AN426AD4-7's. I used up a couple too many during the early riveting sections.
I finished final-drilling the rudder, and then disassembled everything. The night was then filled with deburr, deburr, deburr. I got about half of the pieces done. Hopefully get the other one's taken care of tomorrow night, and get a shot of the rolled edge up.
